OUR CAPABILITIES
Countries we supply: USA, England, Bahrain, Trinidad, Egypt, Singapore, Nigeria
Welded Mesh
Hot dip galvanized weld mesh (min 460g/m²), galvanized steel mesh from heavily galvanized conformed to ASTM A 641 class
Mesh size 1.5"x1.5"x 8 gauge
Option size: 2"x2"x 8 gauges
Strand / wire of the mesh are electrically welded at each intersection.
Finish: Corrosion resistance by hot dip galvanizing, with a zinc coating in excess of ASTM A 641-92 class 3.
Wire Mesh Panel Sizes
Wire diameter x wire mesh panel width x length:
2.5mm X 2.4m X 18m
3.0mm X 2.4m X 18m
4.0mm X 2.4m X 18m
Application: For farm fencing and other uses
Galvanised and PVC coated corrosion resistance type option.
Galvanised post for installation and accessories.
Material: Superior quality low carbon steel wire, pre-crimped, to 70mm.
Features: Good corrosion resistance & long work life (min. 10 years).
Post clips: Colour Green
Fencing posts: 60x60mm square pipes.
Corrosion resistance: HDG+Powder Coated Green Colour
Steel welded mesh fence with galvanized steel supports and connections
Fence panels: Welded wire mesh,
125x25mm mesh opening,
5mm wire
Fence postØ 73.0 x 5.16mm gi pipe
Tension band:
With round head bolt & nut
Fence post pipe sleeve: Ø 89.1mm gi pipe
Bracket 70x7mm galvanized iron
M12x50 bolt & nut
M16x160 expansion bolt
PDF detail reference: Weld mesh fencing panels
Welded Mesh Gate
| T | |||||
| Item | Post Length | Outside Dia. | Wall Thickness | Wire Dia. | Mesh Size |
| Gate Post Common To Fence | 2800 | 73.0 | 5.16 | - | - |
| Gate Frame | - | 50x50 | 3.0 | - | - |
| Extension Arm | - | 50x50 | 3.0 | - | - |
| Wire Mesh | - | - | - | 5.0 | 125x25 |
Fittings & Accessories
All Fittings & Accessories To Be Hot-dipped Galvanized After
Manufacture In Accordance With ASTM - 153 & A-123.
Wire Products
Wire - 5mm Thickness, Powder Coated Finish.
125x25mm Mesh Size
Notes
1. All Dimensions Are In Millimeters, Unless Noted Otherwise.
2. Alternative Mesh Sizes & Wire Sizes Are Available On Request.
3. All Plates Are Grade S275, Galvanized, & PVC Coated Green Color.
4.Finish: All pipes are as per ASTM a53 grade A sch.40, 1 hot-dipped galvanized, powder coated grey colour(ral 7011)
PDF detail reference: Welded mesh security gate
Sleeve
Ø89.1x5.49mm thickness Gi Pipe
Welded Wire Mesh
125x25mm Mesh Size
Ø5mm Wire Welded To Gate Frame
Heavy-duty Gate Hinge
Welded To Gate Frame & Sleeve
Gate Frame
Ø48.3x3.68mm THK Gi Pipe
Ø14mm Holes
For 2 Nos-m12x80
Round Head Bolt & Nut
2Nos-m12x80
Round Head Bolt & Nut
Gate Post to Fence
Ø73.0x5.16mm THK THK Gi Pipe
PDF reference: Gate Frame and Sleeve
Green Coated Hot Dip Galvanized Welded Wire Fence Specifications:
| Item | Description | Corrosion Resisting Surface Treatment |
| Mesh | Welded Mesh 125x25 mm x5 mm thk wire dia (2.5 mtrs. height) | HDG+Powder Coated Green Colour |
| V Support | Barbed Arm length ( Single V) 450 mm height | HDG+Powder Coated Green Colour |
| Post Cap | Post Cap 73.0 dia | HDG+Powder Coated Green Colour |
| Tension Band | Tension Band for Pipe 73 dia | HDG+Powder Coated Green Colour |
| Security Top | Barbed Wire | HDG ( Hot Dip Galvanizing) |
Bow top fencing galvanised and powder coated black
Panel type: Curved panels
Mesh type: Weld mesh trellis
Fence panel height: 1m
Fence gate:
1m high, 1.2m wide self-closing single pedestrian gate, galvanised and powder coated red
Vehicle access gate: 1m high, 3m wide self-closing dual used pedestrian and maintenance vehicle access gate, galvanised and powder coated red
Supplied with corner posts, gate supplied with locks
Wire mesh fencing for Sydney Australia market
Made of electro welded mesh of galvanized wire pvc coated
Sizes:
36" 3 X 2 pvc coated mesh fencing panel for temp control
2.1 x 2.4m galvanized with lockable connections between panels and with stand alone feet.
Tubular frame welded in all sides: frames are made of galvanized steel tubes
With footing/bases
Euro style security fencing panels to UK
200 x 50mm.mesh panels, manufactured from 5mm wire and galvanised.
Mesh panel width 3.0m
Panel heights: 1.52,1.81,2.0 & 2.41m.
Panels incorporate 'V' shape reinforcing folds.
6"x6" x 5'-6' x 8' 6 gauge welded wire fence panels
Wire gauge 10 to 14 gauge
Panel size: 32" - 36" height
Mesh Panels
Overall height: 2.4m
zinc coating: 230grams
tensile strenght: 850nmm2
aperture: 50mmx100mm
wire diameter: 5.0mm
v-bend horizontal
post: galvanised
overhang: 40x40mmx2.5mm
Barbed Wire
Barbed wire: 3 rows of 12 guage double twisted barbed wire
Razor barb wire: Hot dipped razor barbed wire,
Bto-22x0.4mmx20mmx12mm
Welded Security Fence Design
Security fence toppings:
Welded mesh fence with razor blade topping to Singapore:
Mesh spacing: 12.5mm (H) X 75mm (L)
Fencing height: 3000mm
Type: Flat panel
Razor height: 500mm
Steel posts and struts comply with the following standards:
BS 4848: Part 4 and BS 4360 (grade 40c) for rolled steel angle (RSA)
BS 4848: Part 2 and BS 4360 (grade 43c) for rectangular hollow section (RHS)
Corrosion Protection
All steel components shall be protected against corrosion using hot dip galvanizing complying with BS EN ISO 1461. All rust, loose scale, oil and dirt shall be removed from
all surfaces before treatment.
Small areas of hot dip galvanized coating damaged by welding, cutting or by excessively rough treatment during transit and erection shall be renovated either by the use of low melting point zinc alloy repair rods or powders made specifically for this purpose, or by the use of at least two coats of good quality zinc-rich paint complying to BS 4652.
Sufficient material shall be applied to provide a zinc coating at least equal in thickness to the original layer.
Razor blade topping
Topping Supports Mounting Bracket
50mm x 75mm x 6mm x 75mm long mild steel angle to BS4848 with 12mm diameter holes for fixing to posts and for topping mounting. Protective finish to be hot dip
galvanised to BS729.
Topping Flexible Rubber Bushes
50mm outer diameter, 12mm inside diameter x 30mm long rubber sleeves to BS4255.
Topping Support Arms
50mm x 50mm x 5mm x 600mm long mild steel angle to BS4848 with 12mm diameter holes for flexible rubber bushed and 6mm vertical slots for barbed razor tape.
Protective finish to be Hot Dip Galvanised to BS729.
Security Topping
Install 18mm wide flat stainless steel 316 razor tape with both edges cut to a double barbed profile at 25mm centres
The razor wire is crimped to a 2.5mm diameter stainless steel spring core wire with a wraparound of 220-240 degrees
The razor tape shall be manufactured as per ASTM F1379-95 standards and have a minimum tensile strength of 1350 MPA
Topping
Bolt to posts.
Bolt to mounting brackets through flexible mounting ensuring flexible mountings are compressed but not distorted.
Extend barb tape coils placed at centres of arms.
Secure to arms at each point of contact with hog rings/tying wire and clip adjacent ends to coils with fixing clips.
Welded wire fabric, posts and Gates, exported to Bahrain market
Material: Welded wire fabric fabricated from low carbon steel wire and electronically control welded
The wire conforms to ASTM A 853 Grade AISI 1006 having a min. tensile strength of 70,000 psi.
Welded wire mesh after welding hot-dipped, galvanised with a min. 1.0 oz/zinc/ft2, then powder coated with 10 mil (0.25mm)min. PVC coating.
PVC coating: Thermally fused and adhered to a primer, thermally cured onto the galvanised steel core wire.
PVC coating shall be applied in a continuous process.
Welded mesh size: Measured wire centre to wire centre.
Mesh Panels hot dipped galvanised to BS EN
ISO 1461 standard
Fabrication & Installation of welded mesh fence including excavation, reinforced concrete footings, steel post, angle bars, wire mesh, barb wire, etc.
Fabrication & Installation of Welded Mesh Gates
Metal Sliding Gate: 2400mm high X 8500mm wide
Emergency Gate : 3000mm high X 6150mm wide
North Gate : 3000mm high X 11825mm wide
West Gate
Main Gate 2.44 H x 1.44 W x 1.44 D
South Gate 2.44 H x 1.44 W x 1.44 D
Miscellaneous Works
Electrical Motor installation including wiring and accessories for sliding gate
Perimeter security fence of anti climb 358 welded mesh has high density small aperture. Suitable for installing cable sensor system. Zinc coating and pvc coating corrosion resistant treatments for mesh fences. Hot dip galvanizing to ASTM A 641-92 class 3. We supply 358 Welded Mesh High Security Perimeter Fencing System for protection of airport, prison perimeters and various access controlled sites.
Mesh panel type: Flat panel, 358 secure mesh, firmly welded, zinc powder galvanized and / or pvc powder coated.
We export high security fence to Egypt, Lybia, Africa, Singapore, and other countries.
Anti Climbing Weld Mesh Panels
358 mesh is named after its measurements 3" x 0.5" x 8 gauges, about 76.2mm x 12.7mm x 4mm in metric.
Welded mesh fencing work in Nigeria
Specification for the welded mesh:
Panel size: 4600mm x 2515mm
Steel wire diameter : 4mm (Spec: BS 1052 -
AMD 6530 1991)
Mesh opening = 76.2mm x 13mm
Panel finish: Hot dipped galvanised to BS EN
ISO 1461, 1999, and coated to prevent corrosion.
Fence post: Bi-steel high strength lattice posts manufactured
from 11.3mm diameter mild steel rod with welded diogonal bracing arrangement formed with 40mm x 3mm flat steel plates.
Features:
Vandal-resistant
Anti-Cutting high density welded wire mesh
Anti climbing small mesh holes
Robust mesh panels with high tensile strength
Excellent view visibility
Excellent corrosion resisting coating finish
Suitable for use with CCTV or unobstructed camera surveillance system
Optional sensor cable alarm system
Galvanized welded mesh,
wire diameter 4mm
Mesh: 12,5mm x 77mm width.
Panel size: 2.630mm x 1.247mm width
Mesh Panels, Barbed Tape, Electrical Camera Surveillance System and Alarm System
Perimeter protection project for LNG ( Liquefied Natural Gas) Plant in Egypt
Security welded mesh fencing is typical constructed with fence mesh, pedestrian gate and vehicular gate, barbed wire topping and accessories.
FENCE MATERIALS
Rolled mesh, welded mesh material specification:
Electrically welded, manufactured from bright drawn mild steel wire, to ASTM A 853-93
Finish: Hot dip galvanized steel to min 460g/m²
Welded mesh size 2"x2", gauge 8, in roll form, not panel form
Fence height minimum 2.6m, maximum 3.0 m.
Finish: Corrosion resistant treatment by zinc coating according to ASTM A 641-92 class 3.
Posts
Hot dip galvanized circular of heavy hollow steel section diameter 3 inch (outer size) conforming to the requirement of ASTM F669.
1.2 height of the post: 3.5 m ( 3 meter for vertical welded mesh and 0.5 m) embedded on concrete foundation post. Galvanized corbel will be fixed on top of post to install coiled razor 0.6 meter diameter.
Rails (horizontal members on top and bottom)
Rail finish: Hot dip galvanized steel heavy hollow circular steel, conformed to the requirement of ASTM F669
Diameter 50 mm, the cross section of diameter 50 mm, thickness , and total length 3meters.
Barbed Wire
Razor barbed wire, hot dip galvanized finish
Connection system between the posts, rails and welded mesh is supplied.
An electronic security cable go through the razor wire loops to form an alarm system.
PDF detail references:
High Security Welded Mesh Panels Topped with Razor Barbed Wire
Lighting for CCTV surveillance
CCTV Surveillance Camera System
Add an Alarm System on weld mesh Fence Line - A superior system for providing further security
With fence alarm system, perimeter security is made easy, reliable and affordable.
Wire cable is attached to the fence in the middle to detect any cutting, climbing, lifting or jumping off the fence.
The sensor cable can be installed on mesh fences, gates and concertina razor wire coils.
More high security fencing projects are supplied and delivered to Zimbabwe, Africa and other countries.
